KONICA 7145 SERVER 2008 DRIVERS

KONICA 7145 SERVER 2008 DRIVER DETAILS:

Type: Driver
File Name: konica_7145_26107.zip
File Size: 4.1 MB
Rating:
3.99
143 (3.99)
Downloads: 94
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* (*Free Registration Required)

Download Now
KONICA 7145 SERVER 2008 DRIVER



January Select bit number of the DIP switch. Use the arrow key at the center.

FS Message is displayed after stopping temporarily at 25 copies. FS Message is displayed after stopping temporarily at 20 copies.

Default value of the is 0. Switching of the count-up function When using an EKC, the password screen appears at the end of each job.

SW for decreased toner consumption potential by 50V 20 step in this setting allows the consumption of toner to be reduced. Increasing the potential by 50V 20 step allows the image density to increase a little. Mode 0 0 0 1. No adjustment Toner level detection toner supply display After the TLD Toner konica 7145 server 2008 sensor detects the no toner condition for more than a specified period of time, this sets a timing for displaying the message Please supply toner.

Konica Minolta Driver Windows 7 64 Bit

Mode 0 0 1 1 0 1 0 1 Toner consumption increased image density increased Toner consumption decreased image density decreased No adjustment. The elapsed time konica 7145 server 2008 either at. When the output of a copy or print job is completed. Mode 15 seconds 30 seconds 60 seconds seconds 0 0 1 1 0 1 0 1.

KONICA 7145 SERVER 2008 TREIBER

Setting of konica 7145 server 2008 polygon motor for stopping or low speed rotation In order to reduce the sound of rotation of the polygon motor while in idling, it is possible to switch the rotation of the polygon motor either to a low speed rotation or stopping. When the polygon motor is stopped or rotating at low speed, the time required for the first copy being made is increased. Mode No automatic conversion A4 8.

Out-of-original auto erasure When the AMS has been released due to the original size being not the same as that of the transfer paper size, this setting is used in the platen copy to decide whether konica 7145 server 2008 out-of-original area is erased or not. This is the same function as the memory switch function in the key operator mode. Switching is not available in the RADF copy mode. Mode 0 1. When the out-of-original auto erasure is set to automatic in the key operator mode, a threshold value is set for detection of the original area. Mode Thick original Normal original Corresponding to hybrid lights 1 1 0 0 1 0 1 0. Since stapling is restricted only to the front or rear of the leading edge the main body side of the paper exited of the transfer paper, or to both of these two positions, stapling may be sometimes unavailable when stapling is not allowed depending on the position specified.

Konica 7145 - Service Manual 448p

This SW is used to set the operation when konica 7145 server 2008 is not allowed. Mode Auto cancel Auto switching to 1position stapling Inhibit Forced 2-position stapling mode operation 0 0 1 1 0 1 0 1.

Mode copies copies copies copies copies 0 0 0 0 1 0 0 1 1 0 0 1 0 1 0. In the case of the Mode C C 85C 85C 0 0 1 1 0 1 0 1 konica 7145 server 2008 key counter is being drawn out This is to set the operation of the copier when outputting a print job. The details of the operation can be changed by the combination of this setting and the DIPSW setting. When this setting is in the following condition, a setting can be made to decide if the paper is automatically fed from the bypass tray. The setting of the automatic selection of autostart is on with the original size platen detected as non-standard.

DRIVER: KONICA 7145 SERVER 2008

Mode Auto start does not take place Auto start takes place when the bypass tray is selected 0 1. Also, the job settings are the konica 7145 server 2008 as the settings for the previous job. Mode Do not use Use 0 1. Mode No process stop Process stop 0 1.

KONICA SERVER DRIVER

When this SW is used to select the Switched according to the environment, the switching is made between Normal control and All off according to the environment. Switched according to the environment performs the TSL control according to the humidity detected by the main body HUM1 Humidity sensor. Mode Normal control All off Switched according to the environment 0 0 1 0 1 konica 7145 server 2008. Switched according to the environment performs the TSL controle according to the humidity detected by the main body HUM1 Humidity sensor.KONICA SERVER DRIVER - Solvusoft is recognized by Microsoft as a leading Independent Software Vendor, achieving the highest level of.

The download center of Konica Minolta! Find everything from driver to manuals of all of our bizhub or accurio products.

Other Drivers